• Computational Materials Science, Modelling and simulation, extractive metallurgy, transport phenomenon, mineral processing

• Experience in Mechanical Testing-Tensile test(room temp and high temp), Compression test (room temp and high temp), 3 point bend/flexure test, High Cycle Fatigue (HCF), FEM Modelling software like ANSYS, ABAQUS, AUTOCAD, MATLAB,SCILAB, XRD Data analysis

• Mineral Processing, Non Ferrous Extractive Metallurgy, Computational Approach in MME, Transport Phenomenon, Advanced NFEM, Physical Metallurgy Lab, Materials Testing Lab, Materials Characterization Lab, Programming in C, Internet Technology, DBMS

• UGC-HRDC Orientation Course, Andhra University, Visakhapatnam Issued by Andhra University, Visakhapatnam, 2018 Jun 2018
• UGC-HRDC Inter Disciplinary Refresher Course in Environmental Science Issued by , Andhra University, Visakhapatnam Jun 2019
• Advanced Materials and Manufacturing Methods For Automotive Applications Issued by Gitam University, Visakhapatnam Nov 2022
• Introduction to Additive Manufacturing from ANSYSIntroduction to Additive Manufacturing from ANSYS Issued by ANSYS Apr 2022
• Additive Manufacturing and its applicationAdditive Manufacturing and its application Issued by Punjab Engineering College, Chandigarh Feb 2022
• Pedagogy-Learning By Doing and Content DevelopmentPedagogy-Learning By Doing and Content Development Issued by RGUKT, Nuzvid Jan 2020
• Characterization and Testing of Components Following Lase Materials Processing including Surface Engineering and Additive Manufacturing Department of Metallurgical and Materials Engineering, IIT Kharagpur India 18 Mar to 26 Mar 2023

• Friction Stir Welding Modelling, Mechanical Testing, Creep Behavior, Materials Characterization, ECAP modelling, Fatigue modelling

• Attended Workshop on Navigating New Frontiers in Materials, NIT Warangal 2013.
• Attended Workshop on Advances in X-ray Diffraction and SEM, RGUKT Hyderabad 2013.
• Completed UGC-HRDC Inter Disciplinary Refresher Course in Environmental Science, Andhra Univeristy, Visakhapatnam, 2019.
• Completed UGC-HRDC Orientation Course, Andhra Univeristy, Visakhapatnam, 2019.

• Student member of ACS division of Polymer Chemistry 2003-2004.
• Student member of NACE'(National Association of Corrosion Engineering, HOUSTON) 2000-2001.

Journals

1. Ch. Kishore Reddy, V. S. N. Venkata Ramana, Rahul, K. Sri Ram Vikas, Dasari Madhusudhan, Influence of Dry Sliding Wear Parameters on the Rate of Wear AlMg Matrix Composites Reinforced with Ternary Alloy Particulate Springer Nature Singapore Feb 20, 2020 Link: https://www.springerprofessional.de/en/influence-of-dry-sliding-wear-parameters-on-the-rate-of-wear-al-/23608712
2. Suresh Chand, Madhusudhan D, K.B Sravani, A.Uma, V.Sindhu, S.Padmini Devi, G. Padmava, Study Of Microstructure, Hardness And Aging Behaviour Of 2014 Aluminum Alloy, Volume-3, pp 79-83,Issue-3, Jun-2016, International Journal of Advances in Mechanical and Civil Engineering
3. Suresh Chand , Madhusudhan D ,Ch Vara Prasanna Lakshmi and K Sri Naga Sesha, Advances in arc furnace steel making: Review , Mar 31,2016,Transactions on Engineering and Sciences, International Journal .
4. Suresh Chand , Madhusudhan D, K Premalatha, Ayesha Fathima and Shaik Shakila, Study Of Effect Of Phases On Charpy Impact Energy Of Steels, Vol 11,pp 17-25, Number 1,2016,International Journal of Materials Science.
5. Suresh Chand and Madhusudhan D, Influence of High Temperature Solution Treatment on Aging Characteristics of Al-4Cu-6Si Casting Alloy, Vol.3, Issue 1, Jan 2016, International Journal of Engineering Technology Science and Research.
6. Suresh Chand and Madhusudhan D, Influence of martensite on oxidation behavior of mild steel at elevated temperature, Vol .2, Issue 5, Sep. 2015, International Journal of Engineering Research & Management Technology.
7. Suresh Chand and Madhusudhan D, Corrosion Characteristics of Al-0.91Mg-0.55Si-1.12Fe-0.39Ca Al-Alloy Aged at Elevated Temperature in 0.8MH2SO4 Solution ,Vol.4, Issue 11, Nov. 2015, International Journal of Research in Engineering and Technology.
8. Suresh Chand , Madhusudhan D,R Madhuri, K Poliraju and D Karuna Jyoti, INFLUENCE OF SOLUTION TREATMENT AND AGING ON HARDNESS AND XRD OF AL-0.45Si-0.72Mg-0.38Fe ALLOY ,Vol. 3,Issue 6,October-December 2015 ,Transactions on Engineering and Sciences, International Journal

Conferences

1. Madhusdhan D , Dilkush, K Srinivasa Rao and G Madhudhan Reddy, Studies of Optimization parameters in FSW welded Al2219 using ABAQUS, International Conference on advances in Material and Manufacturing Engineering, KIITS, Bhubhaneswar, Mar 17, 2019.
2. Madhusudhan D, Sreeram Vikas, Kalpana K, Nookambika and K Srinivas Rao, New Approaches in modeling of FSW using ABAQUS, National Conference on advances in Mechanical and Material Characterization, Siddhartha Institute of Technology, Vijayawada, Mar 15, 2019.
3. Suresh Chand, S Vineethta, Madhusudhan D , Ch. Sai Krishna, G Kusuma, D Bhawani, K Hema Rao and S Ganesh, Effect of FSW welding speed on microstructure and microhardness of Al-0.84Mg-0.69Si-0.76Fe alloy at moderate rotational tool velocity, International Conference on Recent Advances in Materials, Mechanical and Civil Engineering, MLRITM, Hyderabad, June 1-2, 2017
4. Madhusudhan D, Suresh Chand, S Ganesh and Sai Bhargavi, Modeling and simulation of Charpy impact test of maraging steel 300 using Abaqus, International Conference on Recent Advances in Materials, Mechanical and Civil Engineering, MLRITM, Hyderabad, June 1-2, 2017.
5. Suresh Chand, Madhusudhan D,D. Bhawani, C. Tirumala, Durga Devi, G.Sirisha, Ch. Nagamani, K. Mahesh, Effect of solution treatment and artificial aging on compressive deformation behavior of 6063 aluminum alloy over moderate strain rates, Indo Brazil Bilateral Second International Conference on Advanced Materials and Processing,27-28 March 2017, Kalasalingam University, Tamil Nadu.
6. Suresh Chand and Madhusudhan D, Study of Low Temperature Aging Characteristics & Microstructure of Al-0.9Mg-0.5Si-1.10Fe-0.35Ca-Al alloy, Proceedings of 9th IRF International Conference, IRAJ ,Dec 27,2015. International Journal of Mechanical and Production Engineering (IJMPE), Vol. 4, Issue 2, Mar 2016.

• Influence of Dry Sliding Wear Parameters on the Rate of Wear AlMg Matrix Composites Reinforced with Ternary Alloy ParticulateInfluence of Dry Sliding Wear Parameters on the Rate of Wear AlMg Matrix Composites Reinforced with Ternary Alloy Particulate Springer Nature Singapore Feb 20, 2020 https://www.springerprofessional.de/en/influence-of-dry-sliding-wear-parameters-on-the-rate-of-wear-al-/23608712

• Head of Department, Metallurgical and Materials Engg Feb 2021 to present
• Worked as sports board committee member in RGUKT Nuzvid
• Worked on Committee for Food Court recommendations in RGUKT Nuzvid
• Examination In Charge, RGUKT Nuzvid (Sep 2011 Sep 2012)
• In Charge HOD, Dept. of Metallurgy and Materials Engg, RGUKT Nuzvid (May 2011 Sep 2011 & Jun 2017- Aug 2018 ).
• Worked as discipline/Anti Ragging committee member in RGUKT Nuzvid.
• Worked on committee to frame academic rules and regulations in RGUKT Nuzvid.